| Type | Vhu 80 |
| Order No. | 201.040 |
| Slide motion (max.) | 80 mm |
| Facing diameter | 380 mm |
| Boring diameter | 410 mm |
Description
Vhu – as a boring device - considerably increases possibilities of boring, drilling and milling machines. These heads are suitable for precision boring of cylindrical holes, and for machining of external cylindrical surfaces. The boring head Vhu by means of an automatic slide feed makes possible facing, backfacing and taper machining. The slide feed is adjustable in three or four grades and is stopped on adjustable dog by the pin clutch. The feed is derived from the rotary motion of the head, if one of the feed is adjusted, the pin of the clutch is put in and the brake ring is held by means of the stop bar. |
Automatic feed
0,05 - 0,10 - 0,15 - 0,20 mm.rev-1 |
| Hand rapid feed | 3 mm.rev-1 |
| Accuracy of adjustment | 1DIV = 0,01 mm/Ø |
| Diameter of clamping holes (d H8) | 25 mm |
| Weight of head | 8,1 kg |
| Weight of set | 19,0 kg |
| Taper shanks VK | VK800, VK801 |
| Size of casette | 490 x 350 x 165 mm |
| A | 140 mm |
| B | 140 mm |
| C | 36 mm |
| D | 80 mm |
| E | 134 mm |
| Zmax | 80 mm |
| dmax d1 | 210 mm |
| dmax d2 | 300 mm |
| dmax d3 | 410 mm |
| dmax d4 | 180 mm |
| dmax d5 | 380 mm |
| dmax d6 | 380 mm |
| dmax d7 | 320 mm |
| hmax h1 | 125 mm |
| hmax h2 | 110 mm |
Description 2
The screw (34) serves for quick adjusting of slide and, on the contary, the worm with the scale is used for fine adjusting of precision boring. (1 division = slide movement of 0,05 mm.) These heads are delivered with primary accessories in wooden boxes. The taper shank is wxchangeable and it is not a component of primary accessories. Therefore it is necessary to order taper shank as a special item. The boring heads Vhu 110/Vhu 160 are modifications of the basic Vhu 80 resp. Vhu 125 types; they have extended slides and screws. |
Legend
5 - clutch
6 - braking ring
27 - slide
34 - screw
41 - worm with scale
46 - body
50 - stopping bar
K - taper shank |
Attachment:
|
